拉壓試驗機,滿足GB1040， GB13022，GB17200，GB16491等要求。該機廣泛應用于塑料，橡膠等原料和制品的生產和科研中，電子拉力試驗機適合化工生產企業，高等院校，科研院所用于材料的力學性能的測定.主要用于塑料薄膜，織物，皮革，單絲，金屬箔帶等材料的測試.該機廣泛應用于金屬、非金屬及各種復合材料的檢驗分析，是科研院校、大專院校、工礦企業、技術監督、商檢仲裁等部門的理想測試設備

*試驗機，電子*試驗機，拉力機，抗彎強度試驗機，拉壓彎試驗機，                                                                                                    液晶顯示-電子*試驗機（單柱）  
一、       拉壓試驗機性能特點：
拉壓試驗機,滿足GB1040， GB13022，GB17200，GB16491等要求。該機廣泛應用于塑料，橡膠等原料和制品的生產和科研中，電子拉力試驗機適合化工生產企業，高等院校，科研院所用于材料的力學性能的測定.主要用于塑料薄膜，織物，皮革，單絲，金屬箔帶等材料的測試.該機廣泛應用于金屬、非金屬及各種復合材料的檢驗分析，是科研院校、大專院校、工礦企業、技術監督、商檢仲裁等部門的理想測試設備。

拉壓試驗機，設計融匯、吸收了國外的*試驗設備的控制技術及外形設計，本機外形美觀、操作方便、性能穩定可靠。該機采用全數字調速電機及全數字調速系統作為驅動裝置，經圓弧同步帶及圓弧同步帶輪減速系統減速后帶動精密絲杠副加載.本機無污染、噪音低，效率高，精度高，機械慣性小，調整范圍寬，結構緊湊，使用操作方便，性能穩定等優點

二、抗彎強度試驗機,（單柱）主要技術指標：

01、zui大試驗力:單柱結構：0-5KN（試驗力大小可根據用戶需求而定）

02、試驗力顯示范圍:0～5KN

03、試驗力分檔：全程不分檔-*/
04、試驗力測量精度:優于示值的±1%

05、位移分辨率:0.01mm

06、位移測量準確度:優于示值的±1%

07、橫梁移動速度控制范圍:0.05mm/min～300mm/min 說

08、位移速度控制精度:優于±1%

09、拉伸行程:0～800mm（不含夾具）

10、外形尺寸（長×寬×高）: 435mm×275mm×1700mm（單柱）

11、供電電源:220V、50Hz

三、拉壓試驗機,（單柱）配置：

01、高強度主機一臺（單臂式結構）
02、高精度光電編碼器一支

03、全數字調速系統和全數字調速電機各一套

04、精密絲杠副一套

05、精密圓弧同步減速系統一套

06、高精度傳感器一支

07、拉伸輔具一套

08、*試驗機控制系統及大液晶顯示器一套

四、拉壓試驗機,（單柱）功能介紹：

01、速度瞬間切換：試驗過程中可按預先設定的三個速度瞬間切換，以節約試驗時間

02、自動停機：試樣破壞后，移動橫梁自動停止移動

03、顯示方式：試驗過程動態實時顯示試驗力、位移量、試驗速度、峰值、試驗狀態同時實時在同一液晶屏幕上顯示

04、自動返回：試驗完成后試驗機移動橫梁自動返回到試驗初始位置

05、限位保護：具有程控和機械兩級限位保護功能

06、過載保護：當負荷超過額定值的3～5%時設備自動停止工作

07、自動打印：配制微型打印機，可對測試的數據進行打印

Universal testing machine, electronic universal testing machine, tensile machine, bending strength testing machine, bending test machine, liquid crystal display - electronic universal testing machine （ single column ）
One, tension and compression testing machine performance and characteristics:
Tension and compression testing machine, to meet the GB1040, GB13022, GB17200, GB16491 etc.. This machine is widely used in plastic, rubber and other raw materials and products production and scientific research, electronic Rally test machine for chemical production enterprises, universities, scientific research institutes for the mechanical properties of materials - mainly used for plastic film, fabric, leather, silk, metal foil belt materials testing. This machine is widely applied to metal, nonmetal and various composite materials analysis, is a scientific research institutions, universities, industrial and mining enterprises, and technical supervision, arbitration and other departments of the ideal testing equipment.
Tension and compression testing machine, design, integrate and absorption of foreign advanced testing equipment control technology and design, the machine has the advantages of beautiful appearance, convenient operation, stable and reliable performance. The machine adopts digital speed regulating motor and the full digital control system as the drive equipment, by the arc belt and arc synchronous belt wheel deceleration system drive after the precision screw loading. The machine has no pollution, low noise, high efficiency, high precision, mechanical inertia is small, wide adjustment range, compact structure, convenient operation, the advantages of stable performance
In two, the flexural strength testing machine, the main technical indicators （ single column ）:
In 01, the maximum test load: single column structure: 0-5KN （ test force can be based on user demand .）
In 02, the test force display range: 0～ 5KN
03, test grading: full not classified -*/
In 04, the test force measuring accuracy is better than± 1%: indication
In 05, the displacement resolution: 0.01mm
In 06, the displacement measurement accuracy is better than± 1%: indication
07, beam moving speed control range: 0.05mm/min to 300mm/min
In 08, the displacement speed control precision is ± 1%:
In 09, the drawing stroke: 0～ 800mm （ not including jig ）
10, dimensions （ length * width * height ）: 435mm ×275mm× 1700mm （ single column ）
11, power: 220V, 50Hz
Three, tension and compression testing machine, （ single column ） configuration:
In 01, high strength of a host （ single-arm structure ）
02, a high precision photoelectric encoder
03, full digital control system and digital speed regulating motor of each of a set of
04, precision screw set
05, precision circular synchronous deceleration system one set
06, a high precision sensor
In 07, a special stretching device
In 08, universal testing machine control system and liquid crystal display set
Four, tension and compression testing machine, （ single column ） function introduction:
01, speed switching: test process according to the preset three speed switching, in order to save test time
02, automatic shutdown: sample after the destruction, the movable cross beam automatic stop moving
03, show the way: a test process dynamic real-time display of test force, displacement, speed test, peak, simultaneously in the same test condition is displayed on a liquid crystal screen
04, automatic return: after completion of the test machine of movable beam automatically returns to the original position test
05, limit protection: a programmable and mechanical level two limiting protection function
06, overload protection: when the load exceeds the rated value from 3 to 5% when the device stops working automatically
07, automatic printing : preparation of micro printer, the test data for printing