印前設備 印刷機械 印后設備 裝訂設備 廣告設備 辦公設備 印刷機械配件 其它印刷相關器材 其它印刷設備
上海榮計達儀器科技有限公司
上海榮計達儀器科技有限公司
| 參 考 價 | 面議 |
產品型號STT-910
品 牌
廠商性質其他
所 在 地上海市
包裝印刷網采購部電話：0571-88918531
QQ:2568841715
聯系方式：查看聯系方式
更新時間：2023-09-04 09:23:54瀏覽次數：382次
聯系我時，請告知來自 包裝印刷網反光膜耐沖擊測試裝置是按照中華人民共和國標準GB/T18833-2002《公路交通標志反光膜》中反光膜耐沖擊試驗方法研制生產的。該設備具有操作簡潔直觀，是生產及質量監督檢驗部門的設備。
反光膜附著性測定器概述：
STT-910 反光膜附著性測定裝置是上海榮計達實驗儀器有限公司專為生產、質量監督、工程施工和監理等單位測量反光膜附著性而設計和生產的。具有結構合理、操作簡單、適用性廣、測量精度高、測量安全及可靠性好等特點。
Overview of reflective film adhesion tester
STT-910 reflective film adhesion measuring device is designed and produced by Shanghai Rongjida Experimental Instrument Co., Ltd. for production, quality supervision, engineering construction and supervision, etc. It has the characteristics of reasonable structure, simple operation, wide applicability, high measurement accuracy, good measurement safety and reliability.
反光膜附著性測定器技術參數：
鋼錘質量：800 ±3克
鋼錘落差：0.2～0.3 米
Technical parameters of reflective film adhesion tester
Steel hammer mass: 800 ± 3 g
Steel hammer drop: 0.2 ～ 0.3 meters
反光膜附著性測定器結構組成：
主要由鋼錘、鋼錘掛鉤、反光膜粘貼板、底座和撐桿等組成
Structural composition of reflective film adhesion tester
It is mainly composed of steel hammer, steel hammer hook, reflective film paste board, base and brace, etc.
反光膜附著性測定器操作步驟：
按20毫米×250毫米尺寸裁剪反光膜試樣,將長約100毫米的一端貼在反光膜粘貼板的中間部位,另一端卷成環狀,為保險起見可用訂書機加強,將反光膜粘貼板貼膜面朝下置于支架槽內,再用鋼錘掛鉤將鋼錘懸掛在反光膜環行端。待穩定后用秒表測量鋼錘懸掛的時間及反光膜的粘貼狀況，記錄測量時間數據，依據標準評判反光膜的附著性。
Operation steps of reflective film adhesion tester
Cut the reflective film sample according to the size of 20 mm × 250 mm, and stick one end of about 100 mm to the middle part of the reflective film paste board, and roll the other end into a ring. For security, you can use a stapler to strengthen the reflective film The plate film is placed face down in the bracket groove, and the steel hammer is hung on the reflective film circle end with a steel hammer hook. After stabilization, use a stopwatch to measure the hanging time of the steel hammer and the sticking status of the reflective film, record the measurement time data, and judge the adhesion of the reflective film according to standards.
反光膜附著性測定器注意事項：
★為了保障測量結果的準確度，在測量前應盡量做好反光膜試樣的準備工作；貼好反光膜；
★為了確保測量結果可靠，鋼錘的垂掛應均衡平穩；
★本儀器知識產權歸本公司所有，嚴禁仿制；否則，本公司將終止履行相關維修義務，并保留法律追究的權利。
★對本使用說明書如有疑惑歡迎賜教。
Notes on reflective film adhesion tester
★ In order to ensure the accuracy of the measurement results, the preparation of the reflective film sample should be done as far as possible before the measurement; the reflective film should be affixed;
★ To ensure reliable measurement results, the hanging of the steel hammer should be balanced and stable;
★ The intellectual property rights of this instrument belong to the company, and imitation is strictly prohibited; otherwise, the company will terminate the performance of related maintenance obligations and reserve the right to pursue legal investigations.
★ If you have any doubt about this manual, please enlighten me.
反光膜附著性測定器貯存條件：
測定器及其附件應存放在干燥、清潔、無振動、無易燃、易腐蝕物品的環境條件下。
Storage conditions of reflective film adhesion tester
The analyzer and its accessories should be stored in a dry, clean, vibration-free, flammable, and corrosive environment.
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
轉移率100%銀白轉印反光膜工廠
328h-2 面議
STT-990反光膜耐彎曲性能測定儀 反光牌反光材料標簽彎曲性測試儀
STT-990 面議包裝印刷網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
